Cricket fielding positions are more than names on a ground map: they show what a captain expects the batter to do, where the bowler is trying to take the wicket, and how a team is protecting runs. This guide explains the main cricket fielding positions, provides a practical fielding diagram, and shows how to read powerplay, middle-over, death-over, ODI, and Test match setups while following a live cricket match.
Overview
A cricket field is divided into familiar zones around the batter. The exact angle changes because a fielder’s position is described in relation to the striker, the bowler, the popping crease, and the boundary. “Off side” is generally the side in front of a right-handed batter’s body, while “leg side” or “on side” is behind the batter. For a left-handed batter, the visual relationship reverses.
Captains move fielders to support a plan. A bowler may be trying to draw an outside edge, force a mistimed pull, stop a quick single, or make a batter hit against the turn. The field can also respond to the match situation: the score required, wickets remaining, ball condition, pitch behavior, batter handedness, bowler type, and remaining overs.
Use the following simplified diagram as a viewing aid. It is not drawn to scale, and fielders can be placed wider, straighter, or deeper than the labels suggest.
Boundary
Third man Fine leg
\ /
\ Slip /
Point \ [W] [W] / Square leg
\ | /
Cover \ | / Mid-wicket
\ | /
Extra cover [BATTER] Long leg
|
Bowler
|
Straight boundary
Off side: third man, slip, point, cover, extra cover
Leg side: fine leg, square leg, mid-wicket, long legThe “W” markers represent one or more slips. A real field may include only one slip, several slips, a gully, or no close catchers at all.
What to track
Close and ring positions
Slip: A fielder behind the batter on the off side, positioned to catch edges from seamers or spinners. First slip is nearest the wicketkeeper; additional slips are placed progressively wider.
Wicketkeeper: The player behind the stumps. The keeper’s distance from the wicket changes with pace, bounce, spin, and the chance of a stumping or edge.
Gully: Wider than slip and squarer to the wicket. This position targets edges that travel away from the conventional slip cordon.
Point and backward point: These positions cover square and slightly behind square on the off side. They can save cuts, stop singles, and catch a batter who mis-hits a square shot.
Cover and extra cover: Cover is roughly square or slightly in front of square on the off side; extra cover is farther toward the bowler. Captains use these positions to defend drives and pressure batters who prefer hitting through the off side.
Mid-off and mid-on: These are straighter, usually inside or near the inner ring. They restrict singles and can catch lofted drives. Their depth often signals whether the captain is attacking or protecting a boundary.
Leg-side and boundary positions
Fine leg: Behind square on the leg side, often used to control glances, deflections, and fine pulls.
Square leg: Square on the leg side. The position may be attacking for a catch or deeper to stop a pull and limit twos.
Mid-wicket: Between square leg and mid-on. It is important against flicks, whips, and controlled shots into the leg-side gap.
Long leg: A deeper fine-leg position that protects the boundary from hooks and pulls.
Long-on and long-off: Deep, straight boundary positions on the leg and off sides. They are common when a batter is targeting lofted shots or when a bowler is using slower variations.
Third man: Behind square on the off side, usually near or inside the boundary. It protects edges and late cuts, although its depth depends on the pace of the wicket and the batter’s shot range.
When watching a live cricket match, note three things after every field change: which area was strengthened, which area was left open, and what delivery the bowler is likely to bowl. A deep square leg combined with a short ball suggests a plan involving the pull or hook. A slip and a saving cover may indicate an attempt to challenge the outside edge while limiting easy singles.
Common field settings by phase
| Match phase | Common objective | Positions often considered |
|---|---|---|
| Powerplay | Take wickets while limiting easy boundaries | Wicketkeeper, one or more slips, point, cover, mid-off, mid-on, fine leg, square leg |
| Middle overs | Control rotation and create pressure | Point, cover, mid-wicket, square leg, mid-on, a catching or saving position, and boundary riders |
| Death overs | Protect likely boundary zones and prevent twos | Long-on, long-off, deep mid-wicket, deep square leg, fine leg, third man, with inner-ring support |
These are planning patterns, not fixed formations. Fielding restrictions and the number of players permitted outside the inner circle vary by competition and playing conditions, so check the relevant laws or tournament regulations before treating a setup as mandatory.
Cadence and checkpoints
Field placements are easiest to understand when reviewed at specific checkpoints rather than as a static diagram.
- Before the innings: Check the announced playing XI, the bowler’s style, the batter’s handedness, venue dimensions, and any available pitch report. A short boundary can influence which boundary riders are prioritized.
- At the toss and opening overs: Watch whether the captain starts with attacking catchers or immediately protects a scoring area. Compare the first field with the opening bowler’s intended line and length.
- After a wicket: The field may change because a new batter has different strengths. A captain may restore a slip, move a fielder for the new batter’s preferred shot, or protect the boundary after an aggressive dismissal.
- At an over change: Recheck the field when the bowler changes ends or type. A spinner often needs different protection from a fast bowler, and a left-arm or right-arm angle can alter the threatened scoring zones.
- Before a finishing phase: In limited-overs cricket, count the overs remaining and identify the boundary riders. In longer matches, track whether the captain is attacking a set batter or preventing a partnership from developing.
For a reusable match note, record the over, bowler, striker, field change, delivery plan, and result. Comparing those entries with the cricket scorecard and ball by ball commentary gives a clearer picture than judging a single boundary in isolation.
How to interpret changes
A field change is a tactical clue, not proof that a particular ball will be bowled. Interpret it alongside the bowler’s recent deliveries and the batter’s response.
| Observed change | Possible tactical reading | Question to ask |
|---|---|---|
| Slip added | The captain may be encouraging an attacking line or targeting an edge | Is the bowler moving the ball, or is the batter driving away from the body? |
| Deep square leg added | Protection against pulls, hooks, or leg-side power hitting | Has the bowler used short balls or cramping lines? |
| Third man moved deep | Protection against edges and late cuts | Is the bowler using width, or has the batter shown a preference for opening the face? |
| Cover brought inside | Pressure on singles and encouragement to hit over the off side | Does the batter take the risk, or choose a lower-risk rotation shot? |
| Long-on or long-off posted | Anticipation of lofted straight hitting or a defensive plan | Is the bowler changing pace, length, or angle? |
Format matters. In T20 cricket, a captain has fewer balls to create pressure, so boundary protection and matchup-based changes can happen quickly. In an ODI, the field may shift between powerplay restrictions, consolidation, and the final overs. In Test cricket, close catchers can be retained for longer when the pitch, batter, and match state justify a wicket-taking approach. None of these formats has one universal field: conditions and competition rules always matter.
Do not confuse a defensive field with passive captaincy. A deep fielder can be used to prevent a boundary while the bowler attacks a particular weakness, and an apparently attacking catcher may also remove a low-risk scoring option. To assess the decision, compare expected risk, available runs, wickets in hand, and the quality of the batter on strike.
When to revisit
Return to this guide whenever you watch a new format, venue, tournament, or bowling style. Fielding terminology remains broadly stable, but competition regulations, powerplay definitions, approved playing conditions, and common tactical trends can change. Editors and regular readers should review the article monthly or quarterly during an active season, and sooner when a major competition publishes updated regulations.
Use this practical checklist during your next match:
- Identify the striker’s handedness and mark the off side and leg side.
- Locate the wicketkeeper, slips, point, cover, mid-off, mid-on, square leg, and fine leg.
- Count the deep fielders and note which boundary is being protected.
- Watch the field after a wicket, bowling change, over change, or boundary.
- Link each movement to the bowler’s line, length, pace, spin, or variation.
- Compare the field plan with the score, required rate, wickets remaining, and overs left.
- Check the competition’s current playing conditions before drawing conclusions about fielding restrictions.
With that routine, a cricket fielding diagram becomes a live tactical map. It can help you follow match analysis, understand captaincy decisions, and recognize why the same position may be aggressive in one situation but defensive in another.